 |
 |
 |
 |
 |
|
|
|
|
AP,
AT, AC
|
AP, AT,
AC : Al METALLISED POLYPROPYLENE,
POLYESTER
1.
STRUCTURE
|
2.
STANDARD RESISTANCE
|
| Use |
Resistance |
Tolerance |
| AC |
3.5 W
/ |
+ 1.5
- 1.0 |
| DC |
2.0 W
/ |
+ 1.5
- 1.0 |
Other resistances are available on request.
|
| CHANGE
OF ELECTRICAL PROPERTY PROPORTIONAL TO ALUMINIUM |
CAPACITANCE |
CAPACITANCE REDUCES AS
ALUMINIUM INCREASES
|
|
Tan d |
TANd
INCREASES AS ALUMINIUM INCREASES
|
|
RESISTANCE |
RESISTANCE DECREASES AS
ALUMINIUM INCREASES
|
|
ZAP,
ZAT (Normal)
|
ZAP :
Zn Al METALLISED POLYPROPYLENE
ZAT : Zn Al METALLISED POLYSTER
1.
STRUCTURE
|
2.
STANDARD RESISTANCE
| Use |
Resistance |
Tolerance |
| AC |
3.5 W
/ |
+ 1.5
- 1.0 |
| DC |
2.0 W
/ |
+ 1.5
- 1.0 |
Other resistances are available on request.
|
|
ZAPH,
ZATH (Heavy Edge)
|
ZAPH :
Zn Al METALLISED POLYPROPYLENE HEAVY EDGE
ZATH : Zn Al METALLISED POLYSTER HEAVY EDGE
1.
STRUCTURE
|
Reinforced side is good for metal connection when end
spraying by the thicker metallized layer, while good
self-healing property is achieved in the active area where
metallized thinner.
2.
STANDARD RESISTANCE ( W
/
)
| Heavy
Edge |
Active
Area |
Total |
3.5 + 1.5
-1.0 |
7.5
+ 2.5
-2.0 |
6.0 + 3.0
-2.0 |
Other resistances are available on request.
|
|
|
|
|
|
©
Copyright
Dhruv Industries Limited. All rights reserved
|
|
